HOME SITE MAP WHAT'S NEW? FIBERGLASS GRATING   GATORGRATE GATORDECK KORDEK FRP GRATING SPECS   CUSTOM STRUCTURAL FABRICATION   CABLE TRAY STRUT SYSTEMS INDUSTRIES & APPLICATIONS   SAFETY & ERGONOMICS   ABOUT SEASAFE SEASAFE BRANDS & TRADEMARKS   LITERATURE LIBRARY   CONTACT US		GatorGrate Open-molded Grating GatorGrate® is a one-piece (integral), reinforced polyester or vinylester FRP grating available in standard panels and sizes. It is manufactured by interweaving continuous, thoroughly-wetted, fiberglass strand with thermosetting resin systems. Typical applications include floor systems, walkways, work platforms, stairs, ramps, trench covers and catwalks. GatorGrate's integral, long-lasting anti-slip top surface makes this the grating of choice in many industries. It is preferred when slippery working conditions are present. GatorDeck Pultruded Grating GatorDeck® has a primary advantage over molded FRP gratings (other than being generally lower in cost): It has superior load-supporting ability over longer spans. GatorDeck is the result of a continuous molding technique in which glass roving, glass matting and a synthetic surface veil are literally pulled (pultruded) simultaneously through a flame-retardant polyester or vinylester resin bath. GatorDeck also features a two-part mechanical locking cross-rod, which increases the support and stability of the grating under extreme loads. The patented flush-top design of the cross-rods and bearing bars also enhance the unidirectional strength and provide easy fabrication and installation. Complete downloadable FRP Model Grating Specs are now in PDF format. For more information and assistance on FRP Grating, please contact Clayton Meaux. For product literature, please see our Literature Library.
		Call us at 1-800-326-8842 or email us at © SEASAFE, INC. All Rights Reserved.