 |
Complete downloadable
FRP Model Grating
Specs
|
||||||||
Call us at 1-800-326-8842 or email us at
|
Complete downloadable
FRP Model Grating
Specs Call us at 1-800-326-8842 or email us at
GatorGrate Open-molded
Grating
GatorGrate® is a one-piece (integral), reinforced polyester
or vinylester FRP grating available in standard panels and sizes.
It is manufactured by interweaving continuous, thoroughly-wetted,
fiberglass strand with thermosetting resin systems. Typical applications
include floor systems, walkways, work platforms, stairs, ramps, trench
covers and catwalks. GatorGrate's integral, long-lasting anti-slip
top surface makes this the grating of choice in many industries. It
is preferred when slippery working conditions are present.
GatorDeck Pultruded
Grating
GatorDeck® has a primary advantage over molded FRP gratings (other
than being generally lower in cost): It has superior load-supporting
ability over longer spans. GatorDeck is the result of a continuous
molding technique in which glass roving, glass matting and a synthetic
surface veil are literally pulled (pultruded) simultaneously through
a flame-retardant polyester or vinylester resin bath. GatorDeck also
features a two-part mechanical locking cross-rod, which increases
the support and stability of the grating under extreme loads. The
patented flush-top design of the cross-rods and bearing bars also
enhance the unidirectional strength and provide easy fabrication and
installation.
Kordek Compression-molded
Grating
Kordek® offers the best available combination of strength, durability
and ease of installation. The compression-molded grating system, originated
by International Grating, Inc. is the only system of its kind in the
world. The process exerts over 600 tons of heated force uniformly,
forcing glass deep into the resin, creating an extra-dense and less
porous grating. This greater strength with less thickness requires
fewer support members, which reduces material cost.
are now in PDF format.
©
SEASAFE, INC. All Rights Reserved.
